On this page, we have shared the Tecno Spark 10 KI5N firmware file in zip format with you. Inside the zip, you will find the firmware, flash tool, USB driver, and easy steps to install it. Flashing your device can fix software problems like bugs, freezing, or getting stuck on the Tecno logo.
Using the Tecno Spark 10 Firmware, you are able to upgrade, downgrade, or fix your device if it is experiencing a bootloop or software issues. If you follow the steps provided below, you will have no trouble repairing your device.
Tecno Spark 10 KI5N Specification
The Tecno Spark 10 comes with two Nano-SIM slots and supports dual standby in GSM, HSPA, and LTE networks, with a 6.6-inch IPS LCD screen size. It runs on Android 13 with HIOS 12, and it has a Mediatek Helio G37 chipset. The device packed with 128GB of internal storage coupled with 8GB of RAM, a microSDXC slot, a 50MP rear camera with a dual-LED flash, and an 8MP front camera. Wi-Fi, Bluetooth, GPS, and NFC are some of the other features it carries. It includes a side fingerprint sensor and has a non-removable battery of 5000 mAh, which supports 18W wired charging.
Pre-Requirements
Backup Your Data: Flashing will erase everything, so back up your important files, apps, and contacts.
Charge the Battery: Make sure the KI5N is at least 50% charged, because it may shut down during this process.
Internet Connection: With a stable internet connection, you can download more files if you need to.
Disable Screen Lock: Disable your phone screen lock before flashing.
Check Flash Tool Settings: Ensure that you have correctly set the flash tool for your phone model.
Check OEM Unlocking: Enable OEM unlocking in the Developer Options menu.
Firmware Details
Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Spark 10 KI5N MT6765 V491
Firmware File Size: 3.65 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to Flash Tecno Spark 10 KI5N
- Download the KI5N firmware and SP Flash Tool from the above links to your computer.
- Extract the downloaded zip file using WinRAR or 7-zip.
- Download and install the MTK USB drivers on your computer.
- Open the SP Flash Tool folder and run the SP Flash Tool.
- Load the firmware (Stock ROM) into the SP Flash Tool.
- Turn off your KI5N device completely.
- In the Flash Tool, click “Download” and connect your phone to the computer with a working USB cable.
- The flashing process will start automatically once your phone is connected.
Advantages of Firmware
- Flashing firmware can make your Tecno Spark 10 faster and stop it from freezing or crashing.
- If the GPS fails to activate, flushing helps solve the problem.
- Flashes can help if your Tecno KI5N phone does not read SIM cards.
- Flashing restores your phone to factory settings and removes root.
- Flashing can reset or remove Factory Reset Protection if you are locked out of your phone after a reset.
- If your KI5N device keeps restarting, flashing can fix the problem.
- It can help remove apps that won’t uninstall.
Important Note: TecnoFirmware is not responsible for any damage that may happen to your device. Please proceed if you have sufficient knowledge about it.