Connect with us

Tecno

Tecno Spark Go 2020 KE5S

Published

1 year ago

on

We have shared Tecno Spark Go 2020 KE5S Firmware, MediaTek USB Drivers, a SP Flash Tool, and a How to Flash guide on this page. All these files and the How to Flash guide are required for flashing the new firmware on your Tecno Spark Go 2020 KE5S device. We test and scan all files before sharing them on our website. Before starting the flashing process, you will require a high-quality USB cable and a Windows OS computer for the flashing process. You must have downloaded all the needed files on your computer.

Updating stock firmware on your Tecno Spark Go 2020 KE5S smartphone can fix all software problems, including the app not responding issue, slow performance problems, auto-restarting issue, dead issue, virus problem, stuck-on Tecno logo issue, auto-restarting issue, Wi-Fi not connecting issue, app not installing problem, Bluetooth not pairing issue, screen flickering issue, rooted device issue, file downloading issue, fast battery draining problem, screen flickering issue, or soft brick issue.

Reasons to Update the Firmware

  • Install missing or outdated kernel versions.
  • Fix Bluetooth audio playback problems.
  • Repair soft-brick caused by bootloader unlock.
  • Reinstall default app permissions.
  • Reinstall Google apps that were removed.

Pre-requisites

Charge the Battery: Make sure your Tecno Spark Go 2020 is charged to at least 70% to avoid shutdowns during flashing.
Understand the Risks: Flashing might void your warranty or damage your Tecno Spark Go 2020 if done incorrectly.
Get Required Files: Download the required firmware and flash tool, then extract the zip files on your computer.
Install USB Drivers: Download and install MTK USB drivers on your computer to ensure your Tecno Spark Go 2020 connects properly.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Tecno Spark Go 2020 KE5S Firmware Flash File (Stock ROM)

Download Required Files

Firmware File Name: Tecno Spark Go 2020 KE5S MT6761
Firmware File Size: 1.61 GB

Download Firmware

Download SP Flash Tool for Windows

Download SP Flash Tool for Linux

Download MediaTek USB Drivers

How to Flash Tecno Spark Go 2020 KE5S

  1. Extract all the downloaded files using WinRAR or 7-Zip on your computer.
  2. Open the SP Flash Tool folder and run the SP Flash Tool.
  3. Load the firmware (Stock ROM) into the SP Flash Tool.
  4. Turn off your Tecno KE5S smartphone completely.
  5. In the SP Flash Tool, Select “Download” and connect your Tecno Spark Go 2020 to the computer with a USB cable.
  6. The flashing process will begin automatically after connecting your phone.

Benefits of Flashing Firmware

  • Overheating Problem: The software update will reduce the overheating issue by cooling your Tecno KE5S device.
  • Improvement of Gaming Lags: Flashing can increase performance to ensure the game runs without screen lags.
  • Compatibility of Apps: Updating the software can help more apps work properly by fixing compatibility problems on your Tecno Spark Go 2020.
  • Fix Keyboard Lag: When the on-screen keyboard becomes slow or freezes in response to inputs, updating the firmware will improve such dynamics.
  • Improve Background Processes: Installing the new flash file will make sure that your Tecno Spark Go 2020 can handle apps better while they are running in the background.
  • Fix Logo Stuck: Flashing can fix the logo stuck issue and restore your Tecno phone’s normal startup.

Important Notes

[*] Credits: The Tecno Spark Go 2020 KE5S firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Backup: Before flashing your Tecno Spark Go 2020 KE5S, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your Tecno Spark Go 2020 KE5S. Please proceed if you have sufficient knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Related Topics:
Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tecno

Tecno Spark 40C KM4K

Published

1 day ago

on

December 3, 2025

By

On this page, we have shared the original firmware, SP flash tool, and MTK USB drivers required for flashing your Tecno Spark 40C KM4K. We compressed all these files in a zip format, you can unzip them using WinRAR software on your computer. The below provided files are tested to ensure they are working properly without any errors.

Before you start flashing your Tecno Spark 40C KM4K, make sure the zip files you have downloaded on your computer are successfully downloaded and verify that they are not corrupted. The flashing process also requires a computer because the SP Flash Tool operates on it and a working USB cable to connect your smartphone with your computer. We have shared the How to Flash guide on this page that will help you flash your Tecno KM4K easily.

Why Flash the Firmware

  • Improve your Tecno Spark 40C RAM performance.
  • Restore lost IMEI numbers on your mobile.
  • Reinstall system apps that are missing from your mobile.
  • Resolve Google Services issues on your Tecno Spark 40C KM4K.

Prerequisites

  • Charge your Tecno Spark 40C KM4K to at least 50% before flashing it.
  • Save all your social media and Google account details.
  • Enable USB debugging in your Tecno Spark 40C settings.
  • Log out of all social and Google accounts from your smartphone.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Download Required Files

Firmware File Name: Tecno_Spark_40C_KM4K_MT6768_15.1.1.106SP30_OP001PF001AZ_030725
Firmware File Size: 5.40 GB

Download Firmware

Download SP Flash Tool

Download MediaTek USB Drivers

How to Flash

  1. Download Firmware and SP Flash Tool on your computer.
  2. Extract the downloaded zip files with WinRAR on your computer.
  3. Download and install the MTK USB drivers on your computer.
  4. Open the SP Flash Tool folder and launch the SP Flash Tool.
  5. Now, load the stock ROM (firmware) in the SP Flash Tool.
  6. Turn off your Tecno Spark 40C.
  7. Click Download Only in the SP Flash Tool, then connect your mobile to the computer with a USB cable.
  8. After connecting your smartphone to your computer, the flashing process will start automatically.

Advantages of Updating Firmware

Fix App Crashes: Installing firmware can update system files to prevent apps from crashing.
Improve Security: Flashing can install the latest security patches on your Tecno Spark 40C KM4K.
Fix Overheating: Flashing can also help solve overheating problems.
Update Software: Flashing the latest firmware can update your Tecno Spark 40C KM4K software.

Important Notes

[*] Credits: The above firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Backup: Before flashing your Tecno Spark 40C KM4K, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your mobile. Please proceed if you have some knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Continue Reading

Tecno

Tecno Spark 40 KM5

Published

1 week ago

on

November 27, 2025

By

On this page, we have shared the original firmware, SP flash tool, and MTK USB drivers required for flashing your Tecno Spark 40 KM5. We compressed all these files in a zip format, you can unzip them using 7-Zip software on your computer. The below provided files are tested to ensure they are working properly without any errors.

Before you start flashing your Tecno Spark 40, make sure the zip files you have downloaded on your computer are successfully downloaded and verify that they are not corrupted. The flashing process also requires a computer because the SP Flash Tool operates on it and a working USB cable to connect your smartphone with your computer. We have shared the How to Flash guide on this page that will help you flash your Tecno Spark 40 KM5 easily.

Why Flash the Firmware

  • Improve your Tecno Spark 40 RAM performance.
  • Reinstall system apps that are missing from your Tecno Spark 40.
  • Resolve Google Services issues on your device.
  • Fix random app crashes.

Prerequisites

  • Charge your Tecno KM5 to at least 50% before flashing it.
  • Save all your social media and Google account details.
  • Enable USB debugging in your Tecno Spark 40 KM5 settings.
  • Log out of all social and Google accounts from your smartphone.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Download Tecno Spark 40 KM5 Firmware (Stock ROM)

Download Required Files

Firmware File Name: Tecno_Spark_40_KM5_MT6768_15.1.1.103SP18_OP001PF001AZ_060625
Firmware File Size: 4 GB

Download Firmware
Download SP Flash Tool
Download MTK USB Drivers

How to Flash

  1. Download Firmware and SP Flash Tool on your computer.
  2. Extract the downloaded zip files with WinRAR on your computer.
  3. Download and install the MTK USB drivers on your computer.
  4. Open the SP Flash Tool folder and launch the SP Flash Tool.
  5. Now, load the stock ROM (firmware) in the SP Flash Tool.
  6. Turn off your Tecno Spark 40 KM5.
  7. Click Download Only in the SP Flash Tool, then connect your mobile to the computer with a USB cable.
  8. After connecting your smartphone to your computer, the flashing process will start automatically.

Advantages of Flashing Firmware

Fix App Crashes: Installing firmware can update system files to prevent apps from crashing.
Improve Security: Flashing can install the latest security patches on your Tecno Spark 40 KM5.
Fix Slow App Launching: Updating the stock ROM can fix the slow app launching issue.
Fix Overheating: Flashing can also help solve overheating problems.
Update Software: Flashing the latest firmware can update your Tecno KM5 device software.

Important Notes

[*] Backup: Before flashing your Tecno Spark 40 KM5, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Credits: The above firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your mobile. Please proceed if you have some knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Continue Reading

Tecno

Tecno Spark Slim KM7K

Published

2 months ago

on

October 19, 2025

By

On this page, we have shared the original firmware, SP flash tool, and MTK USB drivers required for flashing your Tecno Spark Slim KM7K. We compressed all these files in a zip format, you can unzip them using WinRAR software on your computer. The below provided files are tested to ensure they are working properly without any errors.

Before you start flashing your Tecno Spark Slim KM7K, make sure the zip files you have downloaded on your computer are successfully downloaded and verify that they are not corrupted. The flashing process also requires a computer because the SP Flash Tool operates on it and a working USB cable to connect your smartphone with your computer. We have shared the How to Flash guide on this page that will help you flash your smartphone easily.

Why Flash the Firmware

  • Improve your Tecno Spark Slim KM7K RAM performance.
  • Reinstall system apps that are missing from your Tecno Spark Slim.
  • Resolve Google Services issues on your device.

Prerequisites

  • Charge your Tecno Spark Slim KM7K to at least 50% before flashing it.
  • Save all your social media and Google account details.
  • Enable USB debugging in your mobile settings.
  • Log out of all social and Google accounts from your Tecno KM7K.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Download Tecno Spark Slim KM7K Firmware (Stock ROM)

Download Required Files

Firmware File Name: Tecno_Spark_Slim_KM7K_MT6789_15.1.2.107SP02_OP001PF001AZ_280725_MXML
Firmware File Size: 8.20 GB

Download Firmware
Download SP Flash Tool
Download MTK USB Driver

How to Flash

  1. Download Firmware and SP Flash Tool on your computer.
  2. Extract the downloaded zip files with WinRAR on your computer.
  3. Download and install the MTK USB drivers on your computer.
  4. Open the SP Flash Tool folder and launch the SP Flash Tool.
  5. Now, load the stock ROM (firmware) in the SP Flash Tool.
  6. Turn off your Tecno Spark Slim.
  7. Click Download Only in the SP Flash Tool, then connect your mobile to the computer with a USB cable.
  8. After connecting your smartphone to your computer, the flashing process will start automatically.

Advantages of Updating Firmware

Improve Security: Flashing can install the latest security patches on your device.
Fix Slow App Launching: Updating the stock ROM can fix the slow app launching issue.
Fix Overheating: Flashing can also help solve overheating problems on your Tecno Spark Slim KM7K.
Update Software: Flashing the latest firmware can update your mobile device software.

Important Notes

[*] Credits: The above firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Backup: Before flashing your Tecno Spark Slim KM7K, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your Tecno KM7K. Please proceed if you have some knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Continue Reading

Trending