If you want to upgrade or downgrade your Tecno Pop 7 BF6 for various reasons, you can download the firmware on this page. To flash your Tecno Pop 7, you will also need a SPD Flash Tool and SPD USB Driver, both of which are available on this page. We have scanned all the files using Avira Pro Antivirus software before sharing them.
You can solve Bootloop issues, Bluetooth issues, camera errors, freezing issues, FRP lock issues, and screen lock forgetting by flashing your Tecno Pop 7 BF6 with fresh firmware. You can download all these 100% tested and working files in a zip format, which you can extract using WinRAR software.
The Reasons for Stock ROM Flashing
- Reset developer options to default on your Tecno Pop 7.
- Fix the soft brick that resulted from improper installation.
- Fix fast charging bugs from your Tecno BF6.
- Re-flash to resolve corrupt firmware installations.
- Solve problems with video playback.
- Ensure compatibility with new firmware releases.
- Re-enable blocked system updates on your Tecno BF6.
Pre-Requirements
Charge the Battery: Make sure your Tecno Pop 7 is at least 50% charged to prevent it from shutting down during the flashing process.
SPD Flash Tool Compatibility: Confirm that the SPD flash tool you downloaded works with your computer’s operating system.
Check USB Ports: Verify that your computer’s USB ports are functioning properly to avoid disconnection during flashing.
USB Cable: Use a good-quality USB cable to ensure a stable connection between your Tecno BF6 and computer.
Backup Your Data: Flashing will delete everything, so save your important files and contacts before starting.
Important Note: TecnoFirmware is not responsible for any damage that may happen to your Tecno Pop 7 BF6. Please proceed if you have sufficient knowledge about it.
Firmware (Stock ROM) Details
Brand: Tecno
Flash Tool: SPD Flash Tool
Drivers Supported: Spreadtrum (SPD) USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Pop 7 BF6 V20
Firmware File Size: 3.90 GB
How to Flash
- Download the Tecno Pop 7 BF6 firmware and SPD flash tool to your computer.
- Extract the files with 7-Zip on your computer.
- Install the required SPD USB drivers on your computer.
- Launch the SPD Flash Tool from the SPD Flash Tool folder.
- Load the Stock ROM into the SPD flash tool.
- Turn off your Tecno Pop 7 device.
- Click “Start Downloading” and connect your Tecno Pop 7 via a working USB cable.
- Flashing will begin automatically when connected.
Problems During the Flashing Process
Firmware Mismatch Error.
Solution: Check whether your region and model are supported by the firmware.
Stranded in Recovery Mode:
Solution : Flash firmware again or factory reset your Tecno BF6 from the recovery mode.
Black Screen after Flashing:
Solution: Try a hard reset or flash a compatible version of the firmware.
Fingerprint Sensor Not Working:
Solution: Flash the stock firmware again or restart your Tecno Pop 7 after flashing.
No IMEI after Flashing:
Solution: Fixing the IMEI by using engineering mode or tools that repair the IMEI.
Advantages of Stock ROM (Firmware)
- Flashing firmware installs new security updates on your Tecno Pop 7 BF6 to protect it from threats.
- Flashing a stock ROM can delete apps and games that can’t be uninstalled via normal methods.
- Flashing can speed up your Tecno BF6 phone’s startup process.
- Installing a flash file improves performance, making it easier to switch between apps smoothly.
- Flashing resets system settings to fix weak signals, Wi-Fi, or mobile data problems.
- Updating can resolve problems where the screen freezes while making or receiving calls on your Tecno Pop 7.