On this page, We have shared the tested firmware file for your Tecno Pop 5 LTE BD4i device. You can also download the MTK USB Driver and SP Flash tool from this page. If your Tecno Pop 5 LTE BD4i has freezing, stuck on starting logo, or crashing issues, or if you want to remove the FRP lock from your mobile, you will need to update the firmware.
Tecno Pop 5 LTE Overview
The Tecno Pop 5 LTE phone works with GSM, HSPA, and LTE networks and lets you use two Nano-SIM cards at the same time. It has a 6.52-inch screen with a 720 x 1600 pixel resolution, giving a clear display for watching videos and browsing. The Tecno Pop 5 LTE runs on the operating system Android 11 and HIOS 7.6. The Unisoc SC9863A processor is installed with eight cores, meaning it can perform simple tasks easily. The storage available for the phone is 32GB and 2GB of RAM, but expansion is allowed with the microSD card.. The 8 MP back camera and 5 MP front camera let you take simple photos and selfies. It also has Wi-Fi and Bluetooth for easy connectivity, and a fingerprint sensor on the back for security. The phone’s 5000 mAh battery lasts a long time, making it a good, affordable option for everyday use.
Pre-requisites
Charge the Battery: Ensure your Tecno BD4i is charged to at least 50% to avoid shutting down during the process.
Check Flash Tool Settings: Ensure the SP flash tool is properly configured for your phone model.
Backup Google Account: Download all your Google account data before flashing.
Test USB Connection: Connect your Tecno BD4i to the computer and make sure the connection is stable.
Backup Your Data: Flashing will erase everything, so back up your important data.
Firmware (Stock ROM) Details
Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Pop 5 LTE BD4i MT6761 V23
Firmware File Size: 2 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
Firmware File Name: Tecno Pop 5 LTE BD4i MT6761 V413
Firmware File Size: 2.7 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to Flash Tecno Pop 5 LTE BD4i
- Download the Tecno Pop 5 LTE BD4i firmware (flash file) and SP flash tool to your computer.
- Extract the downloaded zip files using 7-Zip.
- Download and install the MTK USB drivers on your computer.
- Open the SP Flash Tool folder and run the SP Flash Tool.
- Load the Flash File (Stock ROM) into the SP Flash Tool.
- Turn off your Tecno Pop 5 LTE device completely.
- In the SP Flash Tool, click “Download” and connect your Tecno BD4i to the computer with a USB cable.
- The flashing process will begin automatically after connecting your phone.
Benefits of Firmware (Stock ROM)
- Resolves App Crashes: Updating the firmware refreshes the system files that these apps are running on, preventing them from crashing.
- Make your Phone Fast: Flashing can make your Tecno BD4i work faster.
- Repair Proximity Sensor: Flashing can troubleshoot problems with a sensor that turns off the screen during calls.
- Fix Email Problems: Updating can even resolve e-mail receiving and sending issues.
- Remove Viruses: It removes harmful software or viruses and gives your Tecno Pop 5 LTE a new start.
- Fix Network Issues: The flashing can fix weak Wi-Fi and data signal issues by rebuilding the system settings.
Important Note: TecnoFirmware is not responsible for any damage that may happen to your Tecno Pop 5 LTE BD4i . Please proceed if you have sufficient knowledge about it.