On this page, you can download the Tecno Spark 10 5G KI8 firmware file in a zip format, including your firmware, SP Flash Tool, and MTK USB drivers. Flashing your KI8 device can resolve common software issues such as bugs, freezing, logo stuckness, update, downgrade, or repair your device if it’s facing software issues.
Tecno Spark 10 5G Specification
Tecno Spark 10 5G supports GSM, HSPA, LTE, and 5G networks. It has a 6.6-inch IPS LCD display. The device operates with Android 13, over Tecno HIOS 12.6, and is powered by the Mediatek Dimensity 6020 chipset – an octa-core processor with speeds of up to 2.2 GHz and a Mali-G57 MC2 GPU.. The 64GB with 4GB RAM, 128GB with 8GB RAM, and 256GB with 8GB RAM are the inbuilt memory options, and a microSDXC slot is also available to increase the storage capacity. The rear camera has a resolution of 50 MP, while the front camera has a resolution of 8 MP. Wi-Fi and a side-mounted fingerprint sensor are available. It has a 5000mAh non-removable battery with 18W wired charging support.
Pre-requisites
Charge the Battery: To prevent the Tecno KI8 from shutting down during the process, make sure it is at least 50% charged.
Back up all your Data: Flashing will delete everything, so backup the important file.
Use latest MTK USB Drivers: Its compatibility can be improved further by using updated USB drivers.
Update your Computer OS: Make sure that the OS on your computer has the latest version.
Remove Password Protection: Before starting to flash, remove your phone’s password protection.
Close Background Programs: Quit any unused background programs on your computer.
Firmware Details
Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Spark 10 5G KI8 MT6833 V724
Firmware File Size: 4.4 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to Flash Tecno Spark 10 5G KI8
- Download the Tecno Spark 10 5G KI8 firmware and SP flash tool to your computer from above download linkd.
- Unzip the downloaded files using WinRAR or 7-zip.
- Download and install the MTK USB drivers on your computer.
- Go to the SP Flash Tool folder and run the SP Flash Tool.
- Load the firmware (Flash File) into the SP Flash Tool.
- Turn off your KI8 device completely.
- In the SP Flash Tool, click “Download” and connect your Tecno Spark 10 5G to the computer with a USB cable.
- The flashing process will begin automatically after connecting your phone.
Benefits of Flashing Firmware
- Flashing removes harmful software or viruses and gives your Tecno KI8 a fresh start.
- Updating firmware makes your Tecno Spark 10 5G smoother and faster by fixing system issues and adding new features.
- Flashing can solve problems with Bluetooth not connecting.
- Flashing can bring new software features to your KI8 device.
- It resets your phone to the original settings.
- Flashing can fix poor signal, Wi-Fi, or mobile data problems by resetting system settings.
Important Note: TecnoFirmware is not responsible for any damage that may happen to your device. Please proceed if you have sufficient knowledge about it.