On this page, we’re offering the Tecno Spark 10 KI5Q firmware package in a convenient zip file. This package includes everything you need: the firmware file itself, a flash tool, the required USB driver, and step-by-step instructions for anyone looking to update the firmware on their KI5Q device independently.
Many software issues, such as glitches, freezing, and getting stuck on the Tecno logo at startup, can be solved through upgrading the firmware on your KI5Q device. You can easily fix all of these issues and make your smartphone’s performance better again.
Tecno Spark 10 KI5Q Overview
The Tecno Spark 10 smartphone runs on GSM, HSPA, and LTE networks and supports two Nano-SIM cards. It has a 6.6-inch IPS LCD screen with 720 x 1612 resolution. Running on Android 13 with HIOS 12, it uses a MediaTek Helio G37 chipset along with an octa-core processor. The 128GB storage comes with 8 GB RAM, and you can expand storage with a microSDXC card.
The smartphone features a 50 MP primary camera and an 8 MP front camera. Dual-band Wi-Fi, a USB Type-C port, and a side-mounted fingerprint sensor are the other features. The device also has a 5000 mAh battery and supports up to 18W wired charging.
Before You Start
Charge the Battery: Charge your Tecno KI5Q phone to a minimum of 50% so that it won’t shut off at any time during the flashing process.
Backup Your Data: Flashing will erase everything, so back up your important files, apps, and contacts.
Work with a stable computer: The computer one uses to flash should be stable enough not to freeze during the process.
Turn off Antivirus: Uncheck that antivirus application to prevent its interference with the flashing process.
End Unused Programs: Close all the running applications on your computer to increase your focus.
Check Downloaded Files: Make sure that all the downloaded files are complete and not corrupted.
Check Flash Tool Settings: Make sure the SP Flash Tool is properly set for your model phone.
Firmware Details
Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Spark 10 KI5Q MT6765 V221
Firmware File Size: 3.1 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to Flash Tecno Spark 10 KI5Q
- Download the firmware and flash tool from above links to your computer.
- Extract the downloaded zip files using WinRAR.
- Download and install the MTK USB drivers on your computer.
- Open the SP Flash Tool folder and run the SP Flash Tool.
- Load the firmware (Flash File) into the SP Flash Tool.
- Turn off your device completely.
- In the SP Flash Tool, click “Download” and connect your KI5Q phone to the computer with a USB cable.
- The flashing process will begin automatically after connecting your phone.
Advantages of Firmware
- Updating firmware makes your Tecno Spark 10 phone smoother and faster by fixing system issues and adding new features.
- Flashing can reduce overheating on the phone.
- Flashing can help if your Tecno KI5Q phone doesn’t read SIM cards.
- Flashing can fix screen flickering problems.
- Flashing firmware can stop apps from crashing by updating the system files they need.
- Flashing can solve problems with mobile data connections.
- It helps if the brightness control is not working.
Important Note: TecnoFirmware is not responsible for any damage that may happen to your device. Please proceed if you have sufficient knowledge about it.