On this page, we have shared all the required files and tools to flash your Tecno Spark 7 CH7 phone; it includes the firmware (stock ROM), MediaTek (MTK) USB drivers, a SP flash tool, and instructions on how to flash your Tecno Spark 7 CH7 smartphone. We have uploaded all files from our server and stored them in GDrive so you can download them safely and fast. You can download all these files without any viruses because we’ve scanned them with Avast Premium Security. We have compressed all these files in a zip format, and you can extract them using WinRAR.
Installing the official stock ROM on your Tecno Spark 7 can fix common software-related problems if your Tecno device is facing data connection issues, camera shows errors, screen touch issues, SIM card not detecting, freezing on the logo screen, automatic reboot issues, and proximity sensor are not working. Flashing also helps if you want to upgrade or downgrade your Tecno Spark 7 smartphone.
Why Flash the Firmware
- Improve RAM management.
- Restore lost settings after an update failure.
- Fix issues with USB debugging mode.
- Improve phone call quality.
- Fix blocked app permissions.
Pre-Requirements
Charge the Battery: Make sure your Tecno CH7 has at least 70% battery to prevent it from turning off during the process.
Check Device Model: Confirm your Tecno Spark 7 phone’s model to avoid installing the wrong firmware.
Backup Call Logs: Use a backup application to save your call history for future use.
Backup IMEI: Save your phone’s IMEI with a tool in case it gets deleted during flashing.
USB Debugging: Turn on USB Debugging from Developer Options on your Tecno CH7.
Backup Your Data: Flashing erases all files, so make sure to back up everything important before flashing.
Firmware (Stock ROM) Details
Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Download Required Files
Firmware File Name: Tecno Spark 7 CH7 MT6781
Firmware File Size: 4.40 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to Flash Tecno Spark 7 CH7
- Download the Tecno CH7 firmware and SP flash tool to your computer.
- Unzip the downloaded files using WinRAR.
- Download and install the MTK USB drivers on your computer.
- Open the SP Flash Tool folder and run the SP Flash Tool.
- Load the firmware (Stock ROM) into the SP Flash Tool.
- Turn off your Tecno Spark 7 device completely.
- In the SP Flash Tool, click “Download” and connect your Tecno CH7 to the computer with a USB cable.
- The flashing process will begin automatically after connecting your phone.
Problems During the Flashing Process
Device Not Detected
Solution: Install the correct MediaTek USB drivers, and enable USB debugging. Try out another USB cable or port.
Flashing Failed
Solution: Have your Tecno CH7 charged to above 50%; Disable fast boot on your Tecno; Close background applications on your computer.
Error: “Authentication Failed”
Solution: Install an original firmware version or unlock the bootloader.
Benefits of Firmware (Flash File)
- Fix Network Issues: By updating your Tecno Spark 7 phone, you can completely reset its system settings to resolve issues with weak Wi-Fi or mobile data signals.
- Fix the Auto Restart Problem: Flashing helps stop your Tecno CH7 phone from auto-restarting by fixing system files.
- Fix Sharing Problems: Flashing restores missing file and link sharing options in your Tecno CH7 phone system.
- Fix System Animations: Flashing can resolve issues with system animations that are not functioning smoothly or completely.
- Fix Lagging and Crashing: This software update will make your Tecno CH7 go faster with no chance of freezing or crashing.
Important Note: TecnoFirmware is not responsible for any damage that may occur to your Tecno Spark 7 CH7. Please proceed if you have sufficient knowledge about it.