On this page, we are sharing the firmware file in a zip file. Here you will get your firmware file, flash tool, MTK USB driver, and installation guidelines for those who are going to update the firmware on their own KJ6 device. Flashing your Tecno Spark 6 Air KJ6 can solve software-related problems such as bugs, freezing, and having the Tecno logo stuck on your KJ6. In this basic tutorial, we are going to guide you on how to flash your Tecno Spark 6 Air KJ6.
Why You Might Need to Flash Your Tecno Spark 6 Air KJ6
You may flash your Tecno mobile phone for a number of reasons.
- Fixing Software Bugs: If your KJ6 phone is lagging, crashing, or showing errors, flashing the firmware can help restore it.
- Virus or Malware Removal: Flashing can remove any malicious software or viruses that have infected your KJ6 device.
- Stuck in Boot Loop: If it is stuck on the Tecno logo and refuses to start, then flashing can bring your Tecno device out of this problem.
- System Upgrades: If your Tecno KJ6 is slow and old, updating to a newer firmware version can make it better.
Preparations Before Flashing
Before you start flashing, here are a few safety procedures you should follow.
Backup your Data: Please take a backup before flashing, the flashing process erases all application, contact, photo, and document data from your Tecno KJ6 device.
Charge your device: Before starting the flashing process, make sure your Tecno KJ6 device has at least 50% battery.
Download Original Firmware: You can download 100% safe and original firmware for your Tecno Spark 6 Air KJ6 device from the above provided download links.
Things You’ll Need for Flashing
The following tools are required for flashing your Tecno Spark 6 Air KJ6:
- Firmware File (ROM): This is the flash file that will install on your phone.
- SP Flash Tool: This is the tool you’ll need to flash the firmware on your Tecno phone.
- MTK USB Drivers: They enable your computer to connect your KJ6 mobile phone.
- USB Cable: A USB cable is used to connect your phone to your computer.
Tecno Spark 6 Air KJ6 Firmware Details
Brand: Tecno
Device Supported: Tecno Spark 6 Air KJ6
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Spark 6 Air KJ6 MT6789 PJ V116
Firmware File Size: 5.7 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to flash the Tecno Spark 6 Air KJ6
- Download USB Drivers: Download the MTK USB drivers from the above-provided links.
- Download Firmware: Download the firmware for your Tecno Spark 6 Air KJ6.
- Extract Firmware: Extract the zip file with WinRAR after downloading.
- Download SP Flash Tool: Download and install the SP Flash Tool on your computer.
- Load Firmware: Open SP Flash Tool, click “Scatter-loading,” and select the scatter file from the firmware folder.
- Turn off your Phone: Power off your Tecno Spark 6 Air KJ6 completely.
- Start Flashing: In SP Flash Tool, click “Download,” then connect your phone to the computer with a USB cable. The flashing process will begin.
- Reboot Phone: Once flashing is complete, disconnect and turn on your phone. Follow on-screen instructions to set it up.
Done! Your phone is now flashed.
Fixing Common Flashing Problems
If some problems come up during the flashing procedure, these are a few solutions: SP Flash Tool Can’t Find My Phone See if the MTK USB drivers are set up properly. Use a different USB cable and port.
Flashes Stuck or Fails: Make sure you downloaded the correct firmware and installed drivers correctly. If it does not succeed, restart from step one of the procedure.
Phone Won’t Start After Flashing: If your Tecno KJ6 device keeps restarting, try re-flashing the software. If that does not work, you might need to take it to an expert.