On this page, we have shared the Tecno Pova 6 Neo LI6 Firmware (Flash File). Flashing your Tecno Pova 6 Neo LI6 means reinstalling the phone’s software. It can resolve errors such as software bugs or slow performance if your phone is stuck on the logo screen. Here’s an easy guide on how to flash your Pova 6 Neo LI6 device.
The Tecno Pova 6 Neo LI6 was released in May 2024. LI6 device supports GSM, HSPA, and LTE networks. The phone has a big 6.78-inch IPS LCD screen, a 120Hz refresh rate, and a 1080 x 2460 pixel resolution. It has Android 14 with the HIOS 14, as well as a Mediatek Helio G99 Ultimate chipset, which provides smooth performance due to its available octa-core CPU. Memory storage is provided in 128GB and 256GB options and with 8GB RAM for the memory.
The primary camera has a 50 MP lens, whereas the selfie camera features an 8 MP sensor and comes with a 1440p video record capability. It also packs in a fingerprint sensor, stereo speakers, and a 7000 mAh battery with 33W fast charging. Connectivity features include Bluetooth, GPS, NFC, FM radio, and USB Type-C 2.0. Anyone looking for a large screen, powerful performance, and decent enough battery capacity to stand long enough for extended use will find the Tecno Pova 6 Neo LI6 just about perfect.
Pre-Requirements:
- Charge Your Phone: Make sure your Tecno Pova 6 Neo LI6 has a minimum of 50% battery level before starting.
- Take a Backup: Flashing will erase everything on your L16 phone. Backup your contacts, photos, apps, and any other important data.
- Computer & USB Cable: Require a Windows computer and a working USB cable that would connect your phone.
- Download Firmware: The Original Firmware or Flash File for your Tecno Pova 6 Neo LI6 is available for free download above.
- SP Flash Tool: Download and install SP Flash Tool, a program used to flash the firmware onto your phone.
- Install MediaTek (MTK) USB drivers on your computer. This will allow your computer to recognize your phone.
Tecno Pova 6 Neo LI6 Firmware Details
Brand: Tecno
Device Supported: Tecno Pova 6 Neo LI6
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Pova 6 Neo LI6 MT6789 OP V575
Firmware File Size: 6 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How to Flash
- Unzip the firmware and SP Flash Tool files on your computer.
- Open the SP Flash Tool program on your computer.
- Click on “Scatter-loading” in the SP Flash Tool.
- Find and select the scatter file from the firmware folder.
- Select “Download Only”: Choose the “Download Only” option (recommended) in the SP Flash Tool.
- Turn off your Tecno Pova 6 Neo LI6.
- Connect it to your computer using a working USB cable.
- Click the “Download” button in SP Flash Tool.
- The flashing process will begin. Wait until you see a green checkmark, which means it’s complete.
- Disconnect your phone and turn it on. It might take a few minutes to start up.
Troubleshoot Common Problems:
Tecno Pova 6 Neo not detected by PC
Make sure you have successfully installed the MTK USB drivers.
Try switching to another USB cable or port.
Flashing sticks or error message
Make sure you download the firmware for your model of phone.
Restart your phone and computer, and then try it again.