On this page, you can find the firmware file for your Tecno Pova 6 LI7 device in a zip file. This zip file contains everything you need: the LI7 firmware file, a SP Flash Tool, MTK USB drivers, and simple instructions to help you update your Tecno Pova 6 device’s firmware by yourself. Flashing your L17 device can resolve many software issues such as bugs, freezing, or stuckness on the Tecno logo. The bellow provided guide will show you how to flash your Tecno Pova 6.
The Tecno Pova 6 phone works with GSM, HSPA, and LTE networks. It supports two Nano-SIM cards and has basic protection against dust and light splashes (IP53 rating). The screen is 6.78 inches in size, uses an AMOLED display with 1 billion colors, and has a refresh rate of 120Hz. It offers a clear picture with a resolution of 1080 x 2460 pixels. The phone runs on Android 14 with HIOS 14 software and uses the Mediatek Helio G99 Ultimate processor. It comes with either 256GB storage and 8GB RAM or 256GB storage and 12GB RAM. There’s no memory card slot.
The main camera is 108 MP, with LED flash and can even record up to 1440p videos. The front camera is 32 MP and also records in 1440p. Stereo speakers enable audio recording with good quality. This handset comes equipped with Bluetooth, GPS, NFC, infrared port, and USB Type-C. The battery is 6000 mAh and is quite fast. The 70W wired charging capability enables it to recharge 50% in 20 minutes and 100% in 50 minutes. Besides, it can charge other devices at 10W.
Why Flash Your Tecno Pova 6
- Fix Bugs: Flashing can help solve problems if your Tecno Pova 6 is slow, crashing, or has errors.
- Remove Viruses: Flashing can clean your L17 device if it has viruses or malware.
- Stuck on Logo: Flashing can resolve the issue if your phone becomes stuck on the Tecno logo.
- Upgrade: If your Pova 6 LI7 is outdated, flashing with new firmware can make it work better.
Before You Flash
- Backup Your Data: Flashing will erase everything, so save your files first.
- Charge Your Phone: Make sure the battery is at least 50% charged.
- Download Firmware: Follow the link bellow to download the original and safe LI7 firmware.
Tecno Pova 6 LI7 Firmware Details
Brand: Tecno
Device Supported: Tecno Pova 6 LI7
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware
Firmware File Name: Tecno Pova 6 LI7 MT6789 OP V684
Firmware File Size: 6.4 GB
Download SP Flash Tool for Windows
Download SP Flash Tool for Linux
How To Flash
- Download MTK USB Drivers and SP Flash Tool, then install them on your computer.
- Extract the downloaded Tecno Pova 6 LI7 Firmware using WinRAR.
- Open the SP Flash Tool folder and launch the SP Flash Tool.
- Load the Firmware file into the SP Flash Tool.
- Turn Off your Tecno Pova 6 phone completely.
- In the SP Flash Tool, click “Download” and connect your L17 phone to your computer to start flashing.
- When done, disconnect and turn it on. Follow the setup steps.
Troubleshoot Common Problems
If the SP Flash Tool doesn’t find your phone, check your MTK USB drivers or try a different cable.
If the flashing fails, ensure that you have the right Pova 6 firmware and MTK drivers.
If your Tecno Pova 6 device keeps restarting, try re-flashing the firmware.