Connect with us

Tecno

Tecno Pova 4 LG7N

Published

1 year ago

on

On this page, you will find the official firmware file for your Tecno Pova 4 LG7N, the SP Flash Tool, and the MediaTek USB Drivers, and you can easily download it to your computer. We test all files and scan them with the Avast Premium Security Anttivirus to ensure you do not face any errors during the flashing process. We compress all files into a zip format to facilitate easy sharing; you can use any zip extractor software such as WinRAR or 7-Zip to unzip these files. Ensure a stable internet connection for the error-free download of all files.

Updating stock firmware on your Tecno Pova 4 LG7N smartphone can fix all software problems, including the app not responding issue, slow performance problems, auto-restarting issue, dead issue, virus problem, stuck-on Tecno logo issue, auto-restarting issue, Wi-Fi not connecting issue, app not installing problem, Bluetooth not pairing issue, screen flickering issue, rooted device issue, file downloading issue, fast battery draining problem, screen flickering issue, or soft brick issue.

Pre-Requirements

Charge the Battery: Make sure your Tecno LG7N has at least 50% battery to avoid turning off during flashing.
Use a Stable Computer: Ensure the computer you use works properly and won’t shut down during flashing.
Check USB Ports: Verify that your computer’s USB ports function correctly to prevent losing connection.
Backup IMEI: Save your LG7N phone’s IMEI using a tool in case it disappears during the process.
Unlock Bootloader: Unlock your LG7N device’s bootloader if the flashing process requires it.

Why Flash the Firmware

  • Solve WiFi password saving issues on your Tecno Pova 4.
  • Restore factory system icons.
  • Fix problems with aeroplane mode toggling.
  • Solve the issue of the app icon disappearing on your Tecno LG7N.
  • Fix the volume button malfunction.
  • Repair issues with proximity sensor calibration.
  • Resolve headphone jack detection issues.

Firmware (Stock ROM) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Tecno Pova 4 LG7N Firmware Stock ROM (Flash File)

Download Required Files

Firmware File Name: Tecno Pova 4 LG7N MT6789 V887
Firmware File Size: 3.60 GB

Download Firmware

Download SP Flash Tool for Windows

Download SP Flash Tool for Linux

Download MediaTek USB Drivers

How to Flash Tecno Pova 4 LG7N

  1. Download the Tecno Pova 4 LG7N Firmware, MTK USB Driver, and SP Flash Tool on your computer.
  2. Extract the downloaded zip files using WinRAR.
  3. Install MediaTek (MTK) USB drivers on your computer to connect the phone properly.
  4. Launch the SP Flash Tool from the SP Flash Tool folder.
  5. Import the firmware into the SP Flash Tool.
  6. Power off your Tecno LG7N completely.
  7. Press “Download” and connect your smartphone to your computer via USB.
  8. The flashing will begin automatically after connecting your Tecno LG7N device.

Advantages of Installing Firmware (Flash File)

  • If apps are not downloading, flashing your LG7N device can solve the problem and allow them to install properly again.
  • By updating your Tecno Pova 4 with the most recent security patches, you enhance its security against potential threats.
  • Installing a flash file can help your Tecno LG7N support more apps that were not working correctly before, improving overall functionality.
  • Flashing the stock ROM can speed up your phone’s startup time, helping it boot faster and operate smoothly.
  • If your phone is showing the wrong time, updating firmware can fix this by syncing the time correctly.

Important Notes

[*] Credits: The Tecno Pova 4 LG7N firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Backup: Before flashing your Tecno Pova 4 LG7N, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your Tecno Pova 4 LG7N. Please proceed if you have sufficient knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Related Topics:
Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tecno

Tecno Spark 40C KM4K

Published

1 day ago

on

December 3, 2025

By

On this page, we have shared the original firmware, SP flash tool, and MTK USB drivers required for flashing your Tecno Spark 40C KM4K. We compressed all these files in a zip format, you can unzip them using WinRAR software on your computer. The below provided files are tested to ensure they are working properly without any errors.

Before you start flashing your Tecno Spark 40C KM4K, make sure the zip files you have downloaded on your computer are successfully downloaded and verify that they are not corrupted. The flashing process also requires a computer because the SP Flash Tool operates on it and a working USB cable to connect your smartphone with your computer. We have shared the How to Flash guide on this page that will help you flash your Tecno KM4K easily.

Why Flash the Firmware

  • Improve your Tecno Spark 40C RAM performance.
  • Restore lost IMEI numbers on your mobile.
  • Reinstall system apps that are missing from your mobile.
  • Resolve Google Services issues on your Tecno Spark 40C KM4K.

Prerequisites

  • Charge your Tecno Spark 40C KM4K to at least 50% before flashing it.
  • Save all your social media and Google account details.
  • Enable USB debugging in your Tecno Spark 40C settings.
  • Log out of all social and Google accounts from your smartphone.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Download Required Files

Firmware File Name: Tecno_Spark_40C_KM4K_MT6768_15.1.1.106SP30_OP001PF001AZ_030725
Firmware File Size: 5.40 GB

Download Firmware

Download SP Flash Tool

Download MediaTek USB Drivers

How to Flash

  1. Download Firmware and SP Flash Tool on your computer.
  2. Extract the downloaded zip files with WinRAR on your computer.
  3. Download and install the MTK USB drivers on your computer.
  4. Open the SP Flash Tool folder and launch the SP Flash Tool.
  5. Now, load the stock ROM (firmware) in the SP Flash Tool.
  6. Turn off your Tecno Spark 40C.
  7. Click Download Only in the SP Flash Tool, then connect your mobile to the computer with a USB cable.
  8. After connecting your smartphone to your computer, the flashing process will start automatically.

Advantages of Updating Firmware

Fix App Crashes: Installing firmware can update system files to prevent apps from crashing.
Improve Security: Flashing can install the latest security patches on your Tecno Spark 40C KM4K.
Fix Overheating: Flashing can also help solve overheating problems.
Update Software: Flashing the latest firmware can update your Tecno Spark 40C KM4K software.

Important Notes

[*] Credits: The above firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Backup: Before flashing your Tecno Spark 40C KM4K, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your mobile. Please proceed if you have some knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Continue Reading

Tecno

Tecno Spark 40 KM5

Published

1 week ago

on

November 27, 2025

By

On this page, we have shared the original firmware, SP flash tool, and MTK USB drivers required for flashing your Tecno Spark 40 KM5. We compressed all these files in a zip format, you can unzip them using 7-Zip software on your computer. The below provided files are tested to ensure they are working properly without any errors.

Before you start flashing your Tecno Spark 40, make sure the zip files you have downloaded on your computer are successfully downloaded and verify that they are not corrupted. The flashing process also requires a computer because the SP Flash Tool operates on it and a working USB cable to connect your smartphone with your computer. We have shared the How to Flash guide on this page that will help you flash your Tecno Spark 40 KM5 easily.

Why Flash the Firmware

  • Improve your Tecno Spark 40 RAM performance.
  • Reinstall system apps that are missing from your Tecno Spark 40.
  • Resolve Google Services issues on your device.
  • Fix random app crashes.

Prerequisites

  • Charge your Tecno KM5 to at least 50% before flashing it.
  • Save all your social media and Google account details.
  • Enable USB debugging in your Tecno Spark 40 KM5 settings.
  • Log out of all social and Google accounts from your smartphone.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Download Tecno Spark 40 KM5 Firmware (Stock ROM)

Download Required Files

Firmware File Name: Tecno_Spark_40_KM5_MT6768_15.1.1.103SP18_OP001PF001AZ_060625
Firmware File Size: 4 GB

Download Firmware
Download SP Flash Tool
Download MTK USB Drivers

How to Flash

  1. Download Firmware and SP Flash Tool on your computer.
  2. Extract the downloaded zip files with WinRAR on your computer.
  3. Download and install the MTK USB drivers on your computer.
  4. Open the SP Flash Tool folder and launch the SP Flash Tool.
  5. Now, load the stock ROM (firmware) in the SP Flash Tool.
  6. Turn off your Tecno Spark 40 KM5.
  7. Click Download Only in the SP Flash Tool, then connect your mobile to the computer with a USB cable.
  8. After connecting your smartphone to your computer, the flashing process will start automatically.

Advantages of Flashing Firmware

Fix App Crashes: Installing firmware can update system files to prevent apps from crashing.
Improve Security: Flashing can install the latest security patches on your Tecno Spark 40 KM5.
Fix Slow App Launching: Updating the stock ROM can fix the slow app launching issue.
Fix Overheating: Flashing can also help solve overheating problems.
Update Software: Flashing the latest firmware can update your Tecno KM5 device software.

Important Notes

[*] Backup: Before flashing your Tecno Spark 40 KM5, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Credits: The above firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your mobile. Please proceed if you have some knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Continue Reading

Tecno

Tecno Spark Slim KM7K

Published

2 months ago

on

October 19, 2025

By

On this page, we have shared the original firmware, SP flash tool, and MTK USB drivers required for flashing your Tecno Spark Slim KM7K. We compressed all these files in a zip format, you can unzip them using WinRAR software on your computer. The below provided files are tested to ensure they are working properly without any errors.

Before you start flashing your Tecno Spark Slim KM7K, make sure the zip files you have downloaded on your computer are successfully downloaded and verify that they are not corrupted. The flashing process also requires a computer because the SP Flash Tool operates on it and a working USB cable to connect your smartphone with your computer. We have shared the How to Flash guide on this page that will help you flash your smartphone easily.

Why Flash the Firmware

  • Improve your Tecno Spark Slim KM7K RAM performance.
  • Reinstall system apps that are missing from your Tecno Spark Slim.
  • Resolve Google Services issues on your device.

Prerequisites

  • Charge your Tecno Spark Slim KM7K to at least 50% before flashing it.
  • Save all your social media and Google account details.
  • Enable USB debugging in your mobile settings.
  • Log out of all social and Google accounts from your Tecno KM7K.

Firmware (Flash File) Details

Brand: Tecno
Flash Tool: SP Flash Tool
Drivers Supported: MTK USB Drivers
Firmware Type: Original Firmware

Download Tecno Spark Slim KM7K Firmware (Stock ROM)

Download Required Files

Firmware File Name: Tecno_Spark_Slim_KM7K_MT6789_15.1.2.107SP02_OP001PF001AZ_280725_MXML
Firmware File Size: 8.20 GB

Download Firmware
Download SP Flash Tool
Download MTK USB Driver

How to Flash

  1. Download Firmware and SP Flash Tool on your computer.
  2. Extract the downloaded zip files with WinRAR on your computer.
  3. Download and install the MTK USB drivers on your computer.
  4. Open the SP Flash Tool folder and launch the SP Flash Tool.
  5. Now, load the stock ROM (firmware) in the SP Flash Tool.
  6. Turn off your Tecno Spark Slim.
  7. Click Download Only in the SP Flash Tool, then connect your mobile to the computer with a USB cable.
  8. After connecting your smartphone to your computer, the flashing process will start automatically.

Advantages of Updating Firmware

Improve Security: Flashing can install the latest security patches on your device.
Fix Slow App Launching: Updating the stock ROM can fix the slow app launching issue.
Fix Overheating: Flashing can also help solve overheating problems on your Tecno Spark Slim KM7K.
Update Software: Flashing the latest firmware can update your mobile device software.

Important Notes

[*] Credits: The above firmware is officially released by TECNO Mobile. We have scanned the zip package with Norton AntiVirus Plus before sharing it online.

[*] Backup: Before flashing your Tecno Spark Slim KM7K, make sure to back up all your data. Flashing the firmware will permanently delete all data from your device.

[*] Note: TecnoFirmware.com is not responsible for any damage that may occur to your Tecno KM7K. Please proceed if you have some knowledge about it.

[*] Request Firmware: If you’re looking for a specific Tecno firmware that isn’t on our site, you can request it in the comments below or contact us through our “Contact Us” page.

Continue Reading

Trending